• Home skipcontent Sitemap screen-reader language
  • A-
  • A
  • A+
Search

Search.....

Click here to Search
  • Accident Intimation
  • NOC for Commercial
  • Downloads
  • Electric Charges
  • Authorized Login Panel
  • Download Softosignature
Vidyut Suraksha
  • Accident Intimation
  • NOC for Commercial
  • Downloads
  • Electric Charges
  • Authorized Login Panel
  • Download Softosignature
  • Home
  • Introduction
  • Organization
    • Headquarter Lucknow
    • Department Directory Details
    • Sanctioned Post
    • Right to Information Act 2005
      • Details of Public Information Officer
      • Details of Appel Author Officer
    • Sewa Niyamawali
      • Assistant Director Cadre
      • Electrical Safety Officer Cadre
      • Lipikiya Cadre
      • Steno Cadre
  • Administrative Work
  • Charges & Fee
    • Electric Charges
    • Inspection And Trial Fee
  • Suggestion For Public
  • Standard Drawing
    • Guidelines
    • Standard Drawing 1
    • Standard Drawing 2
    • Standard Drawing 3
    • Standard Drawing 4
  • Downloads
  • Check & Verify
    • Verify Noc Report
    • Verify Electricity Duty Exemption Report
    • Supervisor Verification
    • Wireman Verification
    • Contractor Verification
  • Online Application
    • Uttar Pradesh Lift and Escalator Registration Portal
    • NOC for Commercial
    • NOC for Industrial (Nivesh Mitra)
    • NOC Status
    • Apply for Periodical Inspection (Regulation 30)
    • Accident Intimation
    • Apply for exemption, adjustment, and refund of electricity duty
    • Apply for Supervisor certificate and wireman permit
    • Download Softosignature
  • Contact

Office of Director, Power Safety, Uttar Pradesh Government, Vibhuti Block-2, Gomti Nagar, Lucknow.

Number 742 Head E. / NVV / VVIP

Date: September 16, 2004

To,

All District Magistrates,
Uttar Pradesh Government,

Subject: Inspection related to the safety of electrical installation in highly specialized and specific programs of specific persons.

Sir,

It is a request that the inspection of the electrical installation of the site concerned in the event of the involvement of the highly specialized and specialized persons, or the gathering of the assembly, is required to issue certificate of securing electrical installation by editing the Directorate of Electrical Safety. After that, it is fertilized. It is often seen that the information of such program is not received from time and due to lack of time, if there is a shortage in electrical installation then there is practical difficulty in fixing it within a short time. Therefore, it is necessary that the work of installation of related electrical installations related to the programs of highly specialized and specific persons should be handed over to the authorized and recognized experienced licensee electric contractors and the expected security provisions should be mentioned. Some important points in relation to the implementation of the said installations

It is also worth noting that at the time of elections, programs of highly specialized and specialized persons are held in more districts. Office of the Directorate of Electrical Safety is not installed in every district of the state, keeping in view the limited number of officers and technical staff of the Directorate, it is requested to edit the work of inspection of electrical installations from time to time, that the officers of the Directorate and the technical staff Please be pleased to keep the duty as disadvantaged as possible.

Yours faithfully,
Sign-
(R.S Srivastava)
Director,
Electrical Security, Uttar Pradesh,
Lucknow.

Number 742 Head E. / N.V.V.V.V.P., Date.,

Copy of the above transmitted to the following :-

Joint Director, I / II, Electrical Security, Uttar Pradesh Government, Headquarters, Lucknow.

Deputy Director, Electricity Security, Uttar Pradesh Government, Headquarter, Lucknow.

All Assistant Directors, Electrical Security, Uttar Pradesh Government, Headquarters, Lucknow.

All Electrical infrastructures, Headquarters, Lucknow.

Director's camp office.

Enclosure:As applicable

Yours faithfully,
Sign-
(R.S Srivastava)
Director,
Electrical Security, Uttar Pradesh,
Lucknow.

Key points related to security related to the implementation of electrical installation in highly specialized and specific programs and other government programs: -

1. Under rule-45 of the Indian Electricity Rules, 1956, it is necessary that the work relating to electrical installation should be done with an approved licensed electrical contractor. The licenses of 'A', 'B' and 'C' are provided by the Directorate. For government work 'A' category 'approved' and 'B' category 'approved' licensed contractor are authorized. Therefore, prior to giving electrical work, it is necessary to check the license of the concerned contractor. All the wiring material should be in conformity with the standards specified in the Indian Standards Institute and National Electricity Code.

2. Pandaal as far as possible can not be made near the head head or very close to the power line.

3. Do not add as much as possible to the stars used inside the pandal. If it is necessary to add, then it should be connected through the connector within the junction box.

4. The metallic portion of all equipment fans, coolers etc. can be successfully linked to the meaning. It is advisable if the microphone should be operated by battery at the time of speech by specific and specific persons. In the event of being safe, there will be no interruption in the supply of power supply. Systematic arrangement of public address system should be arranged separately.

5. Maximum load of 800 watts in every light of lights and wings and M.C.B. should be placed at the appropriate location to control the supply of each circuit.

6. Accessible space and open wires in the pandal should not be used. The minimum vertical height of the overhead driver should be kept in line with Rule-77 of the Indian Electricity Rules, 1956.

7. In order to provide suitable change-over switch between the two suppliers, in addition to the supply of licenses to the power supply, the generator is also installed. It would be appropriate that during the presence of highly specialized and specialized persons, the power supply should be made from the generator and if the generator capacity is low then in that case, an emergency circuit should be run with the generator under which light points should be given to all such incidents. Suddenly, in the event of a sudden supply of electricity, all the places and especially on the stage could not be dark. Apply the fire extingushers to deal with electric fire.

8. On the places where the main switch and changeover switch should be placed, the roof of the tin / SCC sheet should be placed at least 2.5 meters in height and at least one meter should be kept in front of them.

9. Light fittings should not be less than 2.5 meters in height and all wings should be hung at a height of at least 2.75 meters.

10. It is necessary to use fire proof cables.

11. Halogen lamps should not be installed inside the pandal. Halogen lamps should be shielded from glass and be placed around one meter away from the pandal.

12. For the wiring in the pandal, the PVCSheathed Conducturs or Tough Rubber's Valconaisd Rubber Cable should be used.

13. Insulation Resistance of Electrical Installation is kept in line with the Code of Practice of the Bureau of Indian Standards. Where there is no standard, at least one mega-ohum should be placed insulation resistance.

14. No temporary structures should be made at the bottom and near any electric line. In any case, within the above structure, no part of the structure (pandal) and less than 2 meters of empty space should not be left in the middle of the live driver.

15. Construction of any temporary structure / pandal, at the nearest railway line, electric sub-station, chimney or high potential line, at least 15 meters of safe distance should be kept from the boundary of the said premises.

16. The plug point should not be placed on the ground, the plug point should be placed at the height of 1.5 meters.

Yours faithfully,
Sign-
(R.S Srivastava)
Director,
Electrical Security, Uttar Pradesh,
Lucknow.

Important Links

  • Home
  • Introduction
  • Organization
  • Application Form
  • Electricity Duty

Other Links

  • NOC for Commerical
  • NOC for Industrial (Nivesh Mitra)
  • Accident Intimation
  • Authorized Login Panel

Contact Details

  • Head Office:
    Vibhuti Block-2, Gomti Nagar, Lucknow - 226010
  • Phone no Telephone Number:
    0522-2720679, 2720716
  • Phone no Phone / Fax:
    0522 - 2720679
  • Email id Email:
    [email protected]
  • Terms & Conditions
  • Privacy Policy
  • Copyright Policy
  • Hyperlinking Policy
  • Help
  • Site Map
  • Screen Reader Access

Copyright © 2025 - All Rights Reserved, Directorate of Electrical Safety

Designed and Developed Through

feedbackfeedback Form

Visitor No.: Website Visitor

Last Updated Date : Saturday, 01, April 2025 | 11:30 AM